Cost To Fix A Garage Door

How Much Does It Cost To Fix A Garage Door

Your garage door will develop faults over time, and you will either have to repair or replace it. Knowing How Much Does It Cost To Fix A Garage Door is not out of place; it will only guide you to prepare for it.

Several factors determine the cost of fixing your garage door, including the kind of material (fiberglass, wood, metal, or aluminum) your garage door is made of, size, design, installation, and many others. On average, it will cost you between $149 to $350 to repair your garage door.

In this article, you will find out how much it will cost to fix or replace your garage door and other parts of your door that may get faulty. Factors that determine the cost of repair will be explicitly explained.

How Much Does It Cost To Fix A Garage Door

Contents

How Much Does It Cost To Fix A Garage Door

The cost of fixing a garage door will vary due to the factors that affect the cost and the faulty part of the door. There may also be a price increase or decrease in the cost of door parts and service charges. Generally, it will cost you between $149 to $350 to repair your garage door.

Depending on the extent of damage, minor issues may cost $100, but on average, repairs will cost $247, while replacement will cost $2,400 and above. Also, The garage door’s makeup will influence the repair or replacement cost.

A wooden garage door is the most expensive to repair or replace. It is not easy to repair a wooden garage door because it tends to rot, crack, split, or warp. Once it is damaged, removing it and then replacing it will be the best. Repairing a wooden garage door will cost between $200 to $300; it can be higher or lower due to the wood type and door design.

Factors Affecting Garage Door Repair Cost

Several factors affect the cost of repairing a garage door. You must consider these factors to know the cost of fixing your garage door. The factors include:

1. Garage Door Materials

Garage doors can be made in different materials like wood, metal, fiberglass, and steel; some materials are more expensive than others. Homeowners will choose the material that is aesthetically pleasing or suitable to their climate.

The metal garage door is known for its durability, although it can develop faults over time if exposed to water and road salt. It will cost between $150 to $250 to repair a metal garage door. Aluminum garage doors get dented easily, but they are dustproof and are available in many colors. 

Little repairs on steel garage doors are inexpensive relative to other materials, although individual projects will be more expensive. Steel materials easily corrode and may likely dent.

The cost price for repairing fiberglass ranges from $100 to $200. Fiberglass is durable even in extreme weather conditions and budget-friendly. It does not split, crack, dent, or rust; it is cheaper to repair or replace. 

2. Garage Door Design And Style

The garage door’s style and design also determine the repair cost. Complex designs with multiple features are more expensive to repair than simple designs. Simple designs are straightforward and use simple mechanisms, while complex designs have costly components that may be challenging to find.

They require special tools and techniques as well. Hence, they are expensive to repair.

Types Of Garage Door Design And Style With Their Cost

  • A common style of garage door design is the Sectional Style. A garage door in sections is prone to breakage over time due to its multiple parts. Repairs and replacements are in part and are less expensive, especially if it is for a section of the garage door. Fixing a unit may cost you about $800 to $1,000.
  • If you have a One-panel design garage door, it will cost about $400 to $1,200 to fix. Most of the time, one-panel doors are usually replaced rather than repaired.
  • Carriage Design garage doors are made from wood and are less costly due to their few parts. Repairing a carriage-style garage door is expensive. It requires a complete replacement due to its style and will cost you between $1,000 to $10,000 to repair.
  • Tilt-up is a garage door with a large panel rather than many units. It is usually replaced rather than repaired. Replacement costs will be between $150 to $200.

3. The Type Of Damage And Extent Of It

The damage to the garage door influences the repair or replacement cost. Minor damages like wear and tear in the parts or small bends are easy and less expensive to fix. Faults in the sensor, panel, springs, or motor housing are technical and require time and expertise. This kind of repair is usually costly, and sometimes, you may have to replace the parts.

4. Service Fee

The price of labor also influences the cost of repair. Payment options may be hourly or daily rates; you should compare the prices of various experts to choose a less costly option. The service fee ranges between $75 to $150. 

How Much Does It Cost To Fix A Broken Cable On A Garage Door?

The cables in a garage door help lift the door. When the cable is broken, snaps, or worn out, the door will not move when you press the push button. With a faulty cable, the door may hang or get stuck halfway up or down when you try to open or close it. Fixing a broken cable will cost you between $90 and $115. A pair of cables cost about $30.

Due to the cable’s function, you should hire an expert to install new ones. Fixing it yourself can be dangerous because if you do not install the cables correctly, the door can fall; perhaps it happens when a person is standing under it, leading to serious injuries.

How Much Does It Cost To Fix A Garage Door Spring

Garage door springs go above the garage door and balance its weight to help lift it. The springs are constantly pressured because they work every time the door opens or closes, so you will always notice when one or more breaks. Repairing a garage door spring for different types of springs and doors will cost:

  • Extension springs range between $100 to $120
  • Torsion springs between $200 to $290.
  • Roll-up garage door between $200 to $250
  • Double garage door between $15 to $45 (cost of each spring).

Signs Of A Bad Garage Door Spring:

Below is a list of indicators of a faulty garage door:

  • Squeaking – When your garage door squeaks, it indicates that the springs require lubricant and cleaning.
  • The door does not open when the motor runs.
  • The door does not lower normally but instead crashes.
  • When in motion, it makes a loud bang or excessive noise
  • You can see gaps in the springs.
  • The door is extremely slow.
  • Wear and tear – Frequent use of the door will cause the garage door spring to wear out. If you use your garage door often, you should choose to install high-quality springs with a longer lifespan than others. Raise the door halfway and leave it, then see if it has stopped or is still moving. If it continues to move, you should start making replacement plans.
  • Rust and Corrosion – Springs that come in contact with moisture quickly rust, which weakens the spring’s functionality. To avoid rust, you must lubricate the springs with a silicone-based lubricant. 

Hiring a professional to fix the spring on your garage door is best because they use a special machine for the work. 

How Much Does It Cost To Fix A Dented Garage Door

Fixing a dented door panel will cost about $100 to $200. The cost depends on the extent of damage, door material, and type of damage. If your garage door is badly damaged, you should consider replacing it.

Can A Bent Garage Door Be Fixed?

Replacing a bent door may cost you $700 to $1,400. I recommend you call a professional for the door panel repair because professionals are experienced in fixing panels, and a good job is guaranteed. A garage door panel that is bent will not freely open and close. It may get stuck as it moves up or down.

Your garage door may get bent for several reasons, such as running your car into the door. It would be best if you fixed your bent panel door immediately to be still functional and avoid any future damage.

How To Fix A Bent Garage Door Panel

I advise that you hire a professional to fix your garage. However, if you still want to go ahead with fixing it yourself, here is a detailed step-by-step guide on how to fix a bent garage door panel:

1. Get A Brand New Panel

The best solution for a bent garage door panel is to replace it. A repaired bent door will likely get bad again and maybe worse. You can reach out to an expert who will analyze the level of damage.

2. Get Rid Of The Bend Using Hammer

If the door panel is not severely bent, you can strengthen the panel with a hammer. You can use a wooden mallet to fix a small dent in the door. On the bent part, place a mallet on it, then use the hammer to hit the bent position gently. 

Hit the hammer on the dent carefully so you do not injure your fingers. Do not hit the hammer with so much force. If you do, the dent will expand. The hammer straightening method is a temporary remedy because after straightening the first dent, the spot gets weakened, and it may get bent again. 

3. Use Suction Cups

A suction cup is the latest method used by professionals who repair a dent on door panels. It is suitable for minor dents on a metal door. You put the suction tools on the dent spot, and the force you apply to the tool straightens the bent part. 

Using suction tools saves time and is best for panels with little spots.

4. Using Heat To Remove The Dent

Apply heat to the metal panel and let it cool straight wards. Use aluminum foil to get rid of the dent. Put the aluminum foil on the dent part. Afterward, use a heat source and compress the air to heat and cool the panel quickly.

Is Replacing A Garage Door Worth It?

Before thinking of replacing your garage door, you have to ensure that the damage to your door is beyond repairs. How do you know when your garage door is up for repair:

  • When your garage door is leaning
  • When your garage door feels heavy
  • The panel of your garage door is damaged
  • It just suddenly stops working

After you are sure that your garage door does not only require repairs but a replacement, you must understand that replacing your garage door is worth it. If you do not replace your garage door, it will not function properly, the security will become weak, and it will not serve its purpose.

Go through these bulleted points to know when your garage door is up for replacement

  • When your garage has been intruded.
  • Aged door
  • Serious damage to your door
  • Your garage door has stopped working for sometime
  • Your garage door is consuming a lot of power
  • There are no child safety sensors on your garage door.

How Much Does It Cost To Fix A Garage Door Off-Track

It will cost you about $125 to $4000 to fix a garage door that is off track. 

What Causes A Garage Door To Come Off Track?

There are several reasons why your garage will come off track; they include:

  • A Broken Spring: a broken spring on your garage door will cause one side of the door to carry the load and fall off track under the door’s weight. 
  • Damaged Doors: Damage around a panel’s top or bottom edge can cause your door to go off track. 
  • Force And Impacts: your garage door can go off track if you hit it with a car.
  • Damage Tracks: rollers can be forced out of alignment from bent or damaged tracks.

How Do You Fix A Garage Door That Is Off Track?

First, you must identify why your garage door is off track; from there, you know how to solve the problem. The tools you will need are;

  • Pliers
  • Locking pliers
  • Rubber mallet

Follow these steps to know how to fix your off-track garage door.

  • To begin, disconnect the opener from the door. 
  • Open the door manually to ensure the opener is disconnected from the door.
  • Find the wheels that are getting off track when you open the door. If you have not found it, close the door and open it again. You can seek technical support if you have difficulty locating the wheels.
  • When you have found the wheels that are getting off track, put a stop on the track by snapping the locking pliers under the door and aiming at one of the tracks. 
  •  Use lock pliers to secure the tracks. Secure the outer edge of the tracks with a pair of pliers and pull it to enable you to get the wheel back on track.
  • After properly positioning the wheel, knock the track with the rubber mallet back to its position.
  • Manually check if the door is working properly by removing the lock pliers from the track and moving the door up and down with your hands.
  • If you are sure that the door is manually working, carry out the automatic test by connecting the opener. Press the open and close button on the remote to release the door mechanism.
  • If the door was not correctly fixed after these steps, you could call a professional to fix it. 

How Much Does It Cost To Replace Rollers On Garage Door?

It will cost about $100 to $150 to replace the rollers on your garage door. You will have to replace the rollers on your garage door once they are worn out. Faulty rollers will restrict the door from opening and closing well. You can also call a garage door technician for the replacement.

Conclusion

In this article, you have read How Much Does It Cost To Fix A Garage Door. Consider the extent of damage, door design, service charge, and the type of material before drawing a budget for your garage door repairs and replacement. If you notice that your garage door has developed a fault, fix the door immediately. 

Leave a Comment

Your email address will not be published. Required fields are marked *